Application of overhead line silicon rubber cover to Transmission tower
Time: 2015-07-15 10:10:05     Copyfrom: volsun

Transmission tower is the support point of overhead line. Setting up a loop on the transmission tower is a single-circuit transmission tower, erected two loops on the transmission tower is a double circuit transmission tower. Single-loop refers to a load having a power supply circuit; double-loop refers to a load has two power supply circuits.So why use overhead line silicone rubber cover in transmission tower?

In General, high reliability requirements important substations in enterprises or areas are made of double-circuit transmission line power supply, so as to protect a power blackout, and make another power supply to power. Then here let us introduce the benefits of overhead line silicone rubber cover in transmission tower following:

Improving security and reliability

As the insulating characteristics of silicone sleeve, it can greatly reduce the length of the line suspension insulators, or even completely cancel the suspension insulator, reducing lines flashover due to wind jumping accident risk using hydrophobicity of overhead line silicone rubber cover, can effectively avoid pollution flashover and wet flashover, reduced icing, improve safety levels.

Narrowing the corridor width

This can greatly reduce the transmission channel the width of the corridor, saving valuable land resources. Transmission channel resource shortage is international issues in the development process. This approach can solve the problem of high load density in urban areas, power grid covers a plethora of contradictions

Reducing tower height

Overhead line silicone rubber cover can replace suspension insulator to reduce tower height, meanwhile optimize existing tower structure.

Saving resources

Compared with the traditional transmission line insulation, overhead line silicone rubber cover  belong  to  silicone rubber products, cost is lower.

Any inquires or comments please do not hesitant to contact us.