Reliable waterproof solution for communication cable
Time: 2022-04-26 09:45:37 Copyfrom: SuZhou Volsun Electronics Technology Co.,Ltd.
The built-in mastic cold shrink tube is made by expanding the supporting core through the expansion machine. The mastic structure is added at both ends of the original high quality cold shrink tube and under the permanent radial contraction pressure of the casing.The silicone tube and the new base station waterproof product with a tight structure between the cables is very suitable for operation in small spaces and dense cable joints. It is also an ideal, mature and reliable waterproof solution for communication cable at home and abroad.As for the built-in mastic cold shrink tube, it can be said that it have all the advantages of ordinary cold shrink tube and it has also been extended on its basis to achieve double protection.
Use a knife to cut the silicone tube built-in mastic to observe whether the mastic remains on the supporting core.
Under the condition of 500% expansion rate, bake at 100 ℃ for half a year to observe whether the tear resistance has spread or not.
Precautions:
1. Because the cold shrink tube is a physical expansion, do not drop it during transportation to avoid bursting.
2. When installing, it must be aligned with the position and formed at one time. If there is any deviation, it cannot be reused.
More detail about cold shrink tube,please contact us freely via volsuntube@szvolsun.com
KEYWORD:cold shrink tube,mastic cold shrink tube,cold shrink
RELATED_ARTICLES:
Busbar heat shrink tube for transformers and switchgears
White silicone rubber insulation heat shrink tube
Heat Shrink Tube for circuit board protection
Idetification heat shrink tube for electric motor system insulation
